5% off Coupon Code: Winter Offer Expires 12/3 @ 12AM EST

BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide

BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide

  • Vendor
    BendPak
    Sale price
    $7,970.00
    Regular price
    $7,970.00
    Unit price
    per 
    Save 5% by using
    Coupon Code: Winter | Ends:

    Shipping: Free Shipping on orders over $100!

    Why Buy From Tailored Garages

    BendPak HD-9SW (5175023) 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide

    To accommodate super-wide vehicles on a 9,000-lb. capacity four-post lift, choose the HD-9SW. The “SW” stands for super-wide, and it’s the ideal four-post lift to double your parking and/or service wider vehicles.

    Take Home a Super-Wide ​Four-Post Lift!

    There are thousands of vehicle types out there, and some come a bit wider than others. That’s no sweat for the HD-9SW, a four-post lift that sits fat and happy when it holds vehicles with wider frames. Plus, if you need a lift that offers truly gigantic proportions, the HD-9SWX is one heck of a choice. If your vehicles are tall, heavy and wide, and they need to be stacked or serviced, we can probably lift them. Both models are perfect for a “wide” range of vehicles.

    With all the same great parts and components as the HD-9, our super-wide lift is equally safe and efficient. Check out the working parts and components below to see what makes a BendPak better than the rest, no matter what height/width modifications we make for your pleasure and convenience.

    Additional Information

    Dependable design

    Four heavy-duty stainless steel lifting wire ropes and a single hydraulic cylinder mounted underneath the runway make this lift the most durable, maintenance-free lifting system on the market.

    Dual-hub cable sheaves

    Single-hub cable sheaves represent the cost-cutting way to make a car lift. Not our way. BendPak double-hub sheaves reduce friction against the cables while also extending the life of the lift axles.

    Multi-level locking positions

    Multiple lock positions permit operators to safely stop the lift at the right height for them, or simply adjust to the right height for the job. This is also useful for parking vehicles under the raised lift. Depending on the height of your vehicle(s), and depending on your ceiling height, you can adjust the lock position.

    Heavy-duty aircraft cable

    Four lifting cables help ensure a level rise. Each is constructed from high-grade stainless steel and rated to handle 14,000 lbs. Combined, the four cables can hold 640% more than this four post lift’s rated capacity. Of course, the cables are tucked away into the lift structure. This streamlines the lift design and maintains the sleek look of your shop. It also protects the cables from environmental damage, spills, etc.

    Electric-hydraulic power system

    The electric-hydraulic power system is totally maintenance-free. Controls are ergonomically placed and easy to use, so you’re totally at ease while operating the lift.

    Large base plates

    10" x 12" base plates can be bolted down or left unbolted. We encourage you to work in a way that’s best for you.

    Integrated design

    All moving components are located within the structure. This isn’t just about looks (although it certainly helps with that too). The integrated design addresses a major safety concern: externally routed components are exposed to additional dangers and damages. BendPak avoids these altogether.

    Low-deck runways

    The runways on this BendPak four-post lift rise just 4.5" off the ground. Add the gently inclining ramps, and you can lift virtually anything.

    Longer approach ramps

    Not only are our runways low-profile, we extend them farther than others in the industry. This makes for a car lift that can load sports cars and other low-standing vehicles without damaging them.

    Automatic safety locks

    Engaging the locks is as simple as raising the ramps just past the lock (you’ll hear it click as it passes) and lowering them back on the lock. Check to make sure all locks are on the same position—safety first, after all. And that’s all there is to it! Your four-post lift can be held in that position indefinitely.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    Features

    • Standard rise
    • Shorter runway for smaller spaces
    • Runways accommodate wide or narrow vehicles
    • Runways include rail kit for optional accessories
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Fully enclosed lifting cables, safety locks and sheaves
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • Oversized sheave diameter reduces cable fatigue
    • High-speed lifting
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1.25" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Runways feature non-skid surface
    • Push-button pneumatic safety release
    • Independent backup slack-cable safety latches
    • Inside runways adjust for different tread widths
    • Customizable power unit location
    • Removable approach ramps for additional drive-under clearance
    • Optional drive-thru ramps available
    • Optional drip trays available
    • Optional solid deck available to increase storage capacity
    • Optional 4,500-lb. air / hydraulic rolling jacks available

    Capacity

    Lifting Capacity: 9,000 lbs. (4,082 kg)
    Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
    Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)

    Rise

    A - Min. Runway Height: 7" (178 mm)
    B - Max. Rise: 70" (1,778 mm)
    C - Max. Lifting Height: 77" (1,956 mm)
    Time to Full Rise: 55 seconds

    Outside Dimensions

    D - Overall Width: 202" (5,131 mm)
    E - Outside Length: 174" (4,420 mm)
    F - Overall Length: 200" (5,080 mm)
    G - Height of Columns: 90" (2,286 mm)

    Inside Dimensions

    H - Width Between Columns: 192" (4,877 mm)
    I - Drive-Thru Clearance: 178" (4,521 mm)

    Runways

    J - Runway Width: 19" (483 mm)
    K - Length of Runways: 164" (4,166 mm)
    L - Width Between Runways: 37" (940 mm) or 42" (1,067 mm)
    M - Runway Centerline: 56" (1,422 mm) or 61" (1,549 mm)
    N - Outside Edge of Runways: 75" (1,905 mm) or 80" (2,032 mm)

    Minimum Wheelbase

    Rated Capacity: 115" (2,921 mm)
    75% Capacity: 100" (2,540 mm)
    50% Capacity: 85" (2,159 mm)
    25% Capacity: 70" (1,778 mm)

    Locking

    Locking Positions: 14
    Lock Spacing: Every 4" (102 mm)

    Power Unit

    Motor: 220 VAC / 60 Hz /1 Ph
    Noise: 45 dB

    Shipping

    Weight: 2,752-lbs. (1,248.3 kg)
    Dimensions: 219'' x 21'' x 42'' (5,563 mm x 533 mm x 1,067 mm)

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

      Warranty

      BendPak lifts are warranted for 5 years on equipment structure, to be free of defects in material and workmanship. 2 year warranty on power units, hydraulic cylinders, and 1 year on all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc.

      • Five Years (60‐Months) Warranty on the lift structure
      • Two Years (24‐Months) Warranty on the hydraulic cylinder(s) and power unit
      • One Year (12‐Months) Warranty on operating components
      • One Year (12‐Months) Warranty on electrical components (excluding power unit)
      • One Year (12‐Months) Labor Warranty on site or at factory*
      • One Year (12‐Months) Free‐Shipping** on ground‐freight charges related to warranty performance

      Shipping & Returns

      LTL Service

      LTL (less than truckload) service is the most common method of shipping for all BendPak and Ranger heavy items that are over typical parcel size. Our LTL contract carriers are YRC, Con-way and Estes. These leading freight providers handle and track hundreds of BendPak shipping transactions daily. They generally utilize enclosed vans or trailers with rear roll-up doors that provide access to the inside of the trailer. These carriers have strategically placed terminals located across the United States where they are able to consolidate all of their freight to be picked up and delivered. As a shipment moves from pick up point to destination it will be placed with other freight that is bound for the same area to be delivered. It is important to realize that LTL shipping involves additional handling as other shippers’ freight is often loaded on and off the truck en route to a destination.

      Flatbed Service

      Flatbed service is commonly the only chosen method when shipping heavy items that are oversize and not conducive to standard LTL handling (freight cannot easily be transferred in and out of cargo vans or trailers). A list of products that must be shipped via flatbed service only can be found here. For the handling and transportation of oversize or delicate cargo, flatbed service is usually a more reliable means. Freight is loaded onto owner-operator flatbed trucks at our facility in Santa Paula, California and most likely never handled until delivery. Using flatbed service involves the least handling, which translates to minimal risk of loss or damage while in transit. Transporting equipment via flatbed may increase the delivery time, but many of our customers feel the added assurance of minimized damage is worth the wait.

      For additional information: https://www.bendpak.com/support/orders/shipping-methods/

      You can always contact us at Support@TailoredGarages.com if you have any questions!

      Returns

      BendPak / Ranger prides itself on a tradition of outstanding customer care and support. Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships.

      Our limited return and exchange policy allows you to return defective or incorrect merchandise for a full or partial credit of your order. All returned merchandise requires authorization. Contact our service representatives first for shipping instructions and to obtain a return authorization number. Credit will not be issued unless authorization to return merchandise has been received.

      For all merchandise returned to BendPak / Ranger for reasons other than warranty, a 20% restocking fee and round-trip shipping costs will be deducted front he credit refund. All returned items must be in their original box or crating and must include all packing material, manuals and all accessories. At our discretion, a restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories.

      To initiate a return please contact Support@TailoredGarages.com


          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)