5% off Coupon Code: Winter Offer Expires 12/3 @ 12AM EST

BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width
BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width

BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width

  • Vendor
    BendPak
    Sale price
    $3,705.00
    Regular price
    $3,705.00
    Unit price
    per 
    Save 5% by using
    Coupon Code: Winter | Ends:

    Shipping: Free Shipping on orders over $100!

    Why Buy From Tailored Garages

    BendPak HD-9 (5175861) 9,000-lb. Capacity / Four-Post Lift / Standard Width

    The HD-9 series of 9,000-lb. four-post lifts contains seven different lifting models. Each four-post lift is perfect for vehicle storage and service, whether you’re working at the shop or your home garage. Each model is available with optional casters, drip trays, jack platforms and more.

    Meet One of Our Most Popular and Versatile Lifts!

    A four-post lift requires a serious level of engineering. To reduce strain on the columns and provide ample lifting security at all times, BendPak uses the most durable stainless steel lifting cables, as well as the single hydraulic cylinder, to provide an incredibly powerful and smooth lift operation. With proper use, this car lift will work as well in 10 years as it did on day one.

    The HD-9 offers our largest variety in any BendPak four-post lift weight class because most vehicles serviced by most shops weigh less than 9,000 lbs. If you need to lift heavier vehicles, we have larger-capacity models that keep you covered. For many of you, however, the HD-9 Series will hit the sweet spot for powerful lifting, compact design and product value. Browse our 9K section to see all of what you can get on these models.

    Additional Information

    Dual-hub cable sheaves

    Dual-hub cable sheaves are more expensive to manufacture, but we'd rather send you home with a quality product than a cheap one. They’re necessary to prevent axles, sheaves and cables from burning out before they should. Our philosophy is that your lift should be the last thing you worry about first thing in the morning.

    Multi-level locking positions

    Unique service technicians require unique servicing positions; with the HD-9, you can safely lock your four-post lift at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the lift for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.

    Heavy-duty aircraft cable

    Each four-post lift comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 14,400 lbs. This makes their combined rating over 640% of the total capacity. These cables are hidden within the post columns for both the safety and overall streamlined look of the lift. No one wants to see a cable dangling on the outside of a lift. Tuck that thing away!

    Electric-hydraulic power system

    No need to worry about maintenance on your electric-hydraulic power systems! The controls are all within reach, so you can stop, start and reverse your four-post lift on a dime.

    Large base plates

    10" x 12" base plates keep your car lift rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!

    Caster kit

    Ask us about the 4-piece caster kit that fits all our 9K four-post lifts. They turn your stationary lift into a mobile parking and service station. You can even leave a car on top while you move it!

    Integrated design

    All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. This is a crucial safety feature that also adds significantly to your lift’s curb appeal! (That is, if you have it visible from the curb.)

    Low-deck runways

    We keep our four-post runways to a low 4.5", so low-stance chassis can be comfortably driven onto the lift.

    Longer approach ramps

    Not only are our runways low, we extend them farther than others in the industry. This better suits the lifting of sports cars and other low-standing vehicles.

    Automatic safety locks

    Every BendPak four-post lift is designed with a safety-first mentality. To this end, four locks engage simultaneously as the lift is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    Features

    • 9,000-lb. maximum lifting capacity
    • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
    • Freestanding design
    • Perfect for parking, storage and service
    • Runways accommodate narrow and standard vehicles
    • Runways include rail-kit for optional accessories
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Fully enclosed lifting cables, safety locks and sheaves
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1.25" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Runways feature non-skid surface
    • Push-button pneumatic safety release
    • Independent backup slack-cable safety latches
    • Customizable power unit location
    • Removable approach ramps for additional drive-under clearance
    • Longer approach ramps for low-ground clearance vehicles
    • Optional drive-thru ramps available
    • Optional drip trays available
    • Optional solid deck available to increase storage capacity
    • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
    • ETL Approved

    Capacity

    Lifting Capacity: 9,000 lbs. (4,082 kg)
    Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)
    Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)

    Rise

    A - Min. Runway Height: 4.5" (114 mm)
    B - Max. Rise: 70" (1,778 mm)
    C - Max. Lifting Height: 74.5" (1,892 mm)
    Time to Full Rise: 45 seconds

    Outside Dimensions

    D - Overall Width: 110.25" (2,800 mm)
    E - Outside Length: 174" (4,420 mm)
    F - Overall Length: 200" (5,080 mm)
    G - Height of Columns: 88" (2,235 mm)

    Inside Dimensions

    H - Width Between Columns: 100.25" (2,546 mm)
    I - Drive-Thru Clearance: 86.5" (2,197 mm)

    Runways

    J - Runway Width: 19" (483 mm)
    K - Length of Runways: 164" (4,166 mm)
    L - Width Between Runways: 37.5" (953 mm) or 44.375" (1,127 mm)
    M - Runway Centerline: 56.5" (1,435 mm) or 63.375" (1,610 mm)
    N - Outside Edge of Runways: 75.5" (1,918 mm) or 82.375" (2,092 mm)

    Minimum Wheelbase

    Rated Capacity: 115" (2,921 mm)
    75% Capacity: 100" (2,540 mm)
    50% Capacity: 85" (2,159 mm)
    25% Capacity: 70" (1,778 mm)

    Locking

    Locking Positions: 12
    Lock Spacing: Every 4" (102 mm)

    Power Unit

    Motor: 220 VAC / 60 Hz / 1 Ph
    Noise: 45 dB

    Shipping

    Weight: 1,746-lbs. (792 kg)
    Dimensions: 165'' x 22'' x 34'' (4,191 mm x 559 mm x 864 mm)

     

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

      Warranty

      BendPak lifts are warranted for 5 years on equipment structure, to be free of defects in material and workmanship. 2 year warranty on power units, hydraulic cylinders, and 1 year on all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc.

      • Five Years (60‐Months) Warranty on the lift structure
      • Two Years (24‐Months) Warranty on the hydraulic cylinder(s) and power unit
      • One Year (12‐Months) Warranty on operating components
      • One Year (12‐Months) Warranty on electrical components (excluding power unit)
      • One Year (12‐Months) Labor Warranty on site or at factory*
      • One Year (12‐Months) Free‐Shipping** on ground‐freight charges related to warranty performance

      Shipping & Returns

      LTL Service

      LTL (less than truckload) service is the most common method of shipping for all BendPak and Ranger heavy items that are over typical parcel size. Our LTL contract carriers are YRC, Con-way and Estes. These leading freight providers handle and track hundreds of BendPak shipping transactions daily. They generally utilize enclosed vans or trailers with rear roll-up doors that provide access to the inside of the trailer. These carriers have strategically placed terminals located across the United States where they are able to consolidate all of their freight to be picked up and delivered. As a shipment moves from pick up point to destination it will be placed with other freight that is bound for the same area to be delivered. It is important to realize that LTL shipping involves additional handling as other shippers’ freight is often loaded on and off the truck en route to a destination.

      Flatbed Service

      Flatbed service is commonly the only chosen method when shipping heavy items that are oversize and not conducive to standard LTL handling (freight cannot easily be transferred in and out of cargo vans or trailers). A list of products that must be shipped via flatbed service only can be found here. For the handling and transportation of oversize or delicate cargo, flatbed service is usually a more reliable means. Freight is loaded onto owner-operator flatbed trucks at our facility in Santa Paula, California and most likely never handled until delivery. Using flatbed service involves the least handling, which translates to minimal risk of loss or damage while in transit. Transporting equipment via flatbed may increase the delivery time, but many of our customers feel the added assurance of minimized damage is worth the wait.

      For additional information: https://www.bendpak.com/support/orders/shipping-methods/

      You can always contact us at Support@TailoredGarages.com if you have any questions!

      Returns

      BendPak / Ranger prides itself on a tradition of outstanding customer care and support. Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships.

      Our limited return and exchange policy allows you to return defective or incorrect merchandise for a full or partial credit of your order. All returned merchandise requires authorization. Contact our service representatives first for shipping instructions and to obtain a return authorization number. Credit will not be issued unless authorization to return merchandise has been received.

      For all merchandise returned to BendPak / Ranger for reasons other than warranty, a 20% restocking fee and round-trip shipping costs will be deducted front he credit refund. All returned items must be in their original box or crating and must include all packing material, manuals and all accessories. At our discretion, a restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories.

      To initiate a return please contact Support@TailoredGarages.com


          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)