5% off Coupon Code: Turkey Offer Expires 11/23 @ 12AM EST

BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise
BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise

BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise

  • Vendor
    BendPak
    Sale price
    $3,885.00
    Regular price
    $3,885.00
    Unit price
    per 
    Save 5% by using
    Coupon Code: Turkey | Ends:

    Shipping: Free Shipping on orders over $100!

    Why Buy From Tailored Garages

    BendPak HD-7P (5175510) 7,000-lb. Capacity / Narrow Car Lift / High Rise

    The HD-7P is a 7,000-lb. capacity, narrow-configuration four-post lift. This model offers compact convenience, so it also helps maintain an open, fresh appearance in more spacious garages.

    Narrow Spaces Need the HD-7P Four-Post Lift!

    The HD-7P does not require a special foundation, nor does it involve complicated installation procedures. It's simply the perfect service lift for shops or garages with limited floor space. This four-post lift is about the size of a typical parking space and fits nicely as a residential or commercial parking lift. The applications are endless, but what else would you expect from BendPak? After being in this business for over 50 years, our reputation is as solid as our lifts. If you've ever owned a BendPak four-post lift, you know that means a lot.

    Watch review from Woman.Driven on the HD-7 four-post lift!

    Get the most out of smaller spaces and compact vehicles with BendPak’s HD-7P. This narrow lift shaves 10.5” off the overall width of a standard-size model, which makes for slightly narrower space between the columns too. If you want a 7,000-lb. capacity four-post lift but can’t sacrifice the precious inches taken up by the wider HD-7W, this is the car lift for you. Store classic cars, racers and compact vehicles comfortably and safely.

    Additional Information

    Dependable design

    Four heavy-duty stainless steel lifting wire ropes and a single hydraulic cylinder mounted underneath the runway make this lift the most durable, maintenance-free lifting system on the market.

    Dual-hub wire rope sheaves

    BendPak's over-engineered designs reduce stress and fatigue on the axles, sheaves and wire rope. We insist on using dual-hub wire rope sheaves when appropriate because they ensure that a safer, higher-quality product. With BendPak, total peace-of-mind comes standard with every lift.

    Multi-level locking positions

    Each four-post lift is equipped with multiple lock positions for variable-height parking.  Pneumatic push-button controls will simultaneously release all four independent safety locks.

    Heavy-duty wire rope

    The car lift structure is outfitted with four high-quality stainless steel lifting wire ropes that are rated at 14,400 lbs. each. The combined rating of the rope is more than 822% of the entire lift’s maximum lifting capacity! And we make sure it looks tidy too—all wire rope is fully enclosed within the lift structure.

    Electric-hydraulic power system

    We incorporate maintenance-free electric-hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Large base plates

    10" x 12" base plates provide a solid foundation for the HD-7P. Your four-post lift will be stable and secure for as long as you own it.

    Caster kit

    Optional 4-piece caster kit makes your lift portable, with or without a car situated on the raised platform.

    Integrated design

    For your safety and convenience, the wire ropes, airlines, safety latches and sheaves are all fully enclosed within the car lift columns.

    Low-deck runways

    The low, 4.5" high runways on this four-post lift are made to accommodate low-bodied sports and race cars, as well as mid-size sedans, light trucks and virtually any vehicle under 7,000 lbs.

    Longer approach ramps

    The approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It's the little bit that makes a big difference.

    Automatic safety locks

    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device that engages in the unlikely event of wire rope failure.

    Features

    • 7,000-lb. maximum lifting capacity
    • High lift with short runways
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • High-speed lifting
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1.25" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Ramps feature non-skid surface
    • Push-button pneumatic safety release
    • Optional 4,500-lb. capacity rolling jack available (Model RJ-45)

    Capacity

    Lifting Capacity: 7,000 lbs. (3,175 kg)
    Max Capacity / Front Axle: 3,500 lbs. (1,588 kg)
    Max Capacity / Rear Axle: 3,500 lbs. (1,588 kg)

    Rise

    A - Min. Runway Height: 4.5" (114 mm)
    B - Max. Rise: 82" (2,083 mm)
    C - Max. Lifting Height: 86.5" (2,197 mm)
    Time to Full Rise: 35

    Outside Dimensions

    D - Overall Width: 100.25" (2,546 mm)
    E - Outside Length: 174" (4,420 mm)
    F - Overall Length: 200" (5,080 mm)
    G - Height of Columns: 100" (2,540 mm)

    Inside Dimensions

    H - Width Between Columns: 90.25" (2,292 mm)
    I - Drive-Thru Clearance: 76.5" (1,943 mm)

    Runways

    J - Runway Width: 19" (483 mm)
    K - Length of Runways: 164" (4,166 mm)
    L - Width Between Runways: 37.5" (953 mm) or
    M - Runway Centerline: 56.5" (1,435 mm) or
    N - Outside Edge of Runways: 75.5" (1,918 mm) or

    Minimum Wheelbase

    Rated Capacity: 115" (2,921 mm)
    75% Capacity: 100" (2,540 mm)
    50% Capacity: 85" (2,159 mm)
    25% Capacity: 70" (1,778 mm)

    Locking

    Locking Positions: 15
    Lock Spacing: Every 4" / 102 mm

    Power Unit

    Motor: 220 VAC / 60 Hz. 1Ph.
    Noise: 45 db

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
    BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

      Warranty

      BendPak lifts are warranted for 5 years on equipment structure, to be free of defects in material and workmanship. 2 year warranty on power units, hydraulic cylinders, and 1 year on all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc.

      • Five Years (60‐Months) Warranty on the lift structure
      • Two Years (24‐Months) Warranty on the hydraulic cylinder(s) and power unit
      • One Year (12‐Months) Warranty on operating components
      • One Year (12‐Months) Warranty on electrical components (excluding power unit)
      • One Year (12‐Months) Labor Warranty on site or at factory*
      • One Year (12‐Months) Free‐Shipping** on ground‐freight charges related to warranty performance

      Shipping & Returns

      LTL Service

      LTL (less than truckload) service is the most common method of shipping for all BendPak and Ranger heavy items that are over typical parcel size. Our LTL contract carriers are YRC, Con-way and Estes. These leading freight providers handle and track hundreds of BendPak shipping transactions daily. They generally utilize enclosed vans or trailers with rear roll-up doors that provide access to the inside of the trailer. These carriers have strategically placed terminals located across the United States where they are able to consolidate all of their freight to be picked up and delivered. As a shipment moves from pick up point to destination it will be placed with other freight that is bound for the same area to be delivered. It is important to realize that LTL shipping involves additional handling as other shippers’ freight is often loaded on and off the truck en route to a destination.

      Flatbed Service

      Flatbed service is commonly the only chosen method when shipping heavy items that are oversize and not conducive to standard LTL handling (freight cannot easily be transferred in and out of cargo vans or trailers). A list of products that must be shipped via flatbed service only can be found here. For the handling and transportation of oversize or delicate cargo, flatbed service is usually a more reliable means. Freight is loaded onto owner-operator flatbed trucks at our facility in Santa Paula, California and most likely never handled until delivery. Using flatbed service involves the least handling, which translates to minimal risk of loss or damage while in transit. Transporting equipment via flatbed may increase the delivery time, but many of our customers feel the added assurance of minimized damage is worth the wait.

      For additional information: https://www.bendpak.com/support/orders/shipping-methods/

      You can always contact us at Support@TailoredGarages.com if you have any questions!

      Returns

      BendPak / Ranger prides itself on a tradition of outstanding customer care and support. Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships.

      Our limited return and exchange policy allows you to return defective or incorrect merchandise for a full or partial credit of your order. All returned merchandise requires authorization. Contact our service representatives first for shipping instructions and to obtain a return authorization number. Credit will not be issued unless authorization to return merchandise has been received.

      For all merchandise returned to BendPak / Ranger for reasons other than warranty, a 20% restocking fee and round-trip shipping costs will be deducted front he credit refund. All returned items must be in their original box or crating and must include all packing material, manuals and all accessories. At our discretion, a restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories.

      To initiate a return please contact Support@TailoredGarages.com


          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)