5% off Coupon Code: Turkey Offer Expires 11/23 @ 12AM EST

BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle and Boat Storage Lift / 82" Rise
BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle And Boat Storage Lift / 82" Rise
BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle And Boat Storage Lift / 82" Rise
BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle And Boat Storage Lift / 82" Rise
BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle And Boat Storage Lift / 82" Rise
BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle And Boat Storage Lift / 82" Rise

BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle and Boat Storage Lift / 82" Rise

  • Vendor
    BendPak
    Sale price
    $5,035.00
    Regular price
    $5,035.00
    Unit price
    per 
    Save 5% by using
    Coupon Code: Turkey | Ends:

    Shipping: Free Shipping on orders over $100!

    Why Buy From Tailored Garages

    BendPak HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle and Boat Storage Lift / 82" Rise

    Avoid rust, blemishes, rot, weather damage and more with BendPak's longer, extended-height HD-7500BLX boat lift. It's the safest, most cost-effective way to dry dock your boat.

    The Perfect Boat Lift for Dry Docking!

    Never trust your precious boat to the unpredictability of the water, nor should you pay for dry docks and/or yard storage. Salt water corrosion, barnacles, rust damage, rub marks, coating blemishes, rot and cold weather can do irreversible harm caused to your boat's engine and interior. The longer you go without a boat lift, the more you leave yourself open to catastrophe.

    BendPak has the perfect solution: Keep your boat up in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-7500BLX pulls double-duty as a professional-grade car lift for ground vehicles.

    Valley Indoor RV Storage Uses BendPak Boat Storage Lifts

    Additional Information

    BendPak designed and engineered

    A BendPak boat lift is crafted to the same strict specifications as our automotive lifts, so you know that your boat is exceptionally safe.

    No more docking fees

    A boat lift is a great way to shield yourself from monthly boat storage fees. The larger the boat, the bigger the bill, so there's no better way to keep your boat safe than to store it in your own garage.

    Great for business owners

    Boat storage business owners will also benefit from BendPak boat lifts. They understand better than anyone that more storage can help the business earn a bigger bottom line. Offer your customers the safest boat storage solutions; it's one of the best business decisions you'll ever make.

    Fits most boat trailers

    Wide and narrow installations help accommodate virtually all boat trailer types.

    Dependable design

    Four heavy-duty, stainless steel wire ropes and a single hydraulic cylinder mounted underneath the runway make this lift one of the most durable, maintenance-free models on the market.

    Dual-hub wire rope sheaves

    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub sheaves where appropriate, even if they cost us more to make.

    Multi-level locking positions

    BendPak boat lifts are equipped with multiple adjustable height locking positions for variable-height parking. A convenient lock system releases all four independent safety locks simultaneously.

    Heavy-duty aircraft cable

    Each lift is supplied with 4 high-quality stainless steel wire ropes, each of which is rated to hold 14,400 lbs.

    Electric-hydraulic power system

    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability. All controls are placed close at hand.

    Single hydraulic cylinder

    Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum performance.

    Integrated design

    Lifting cables, airlines, safety latches and sheaves are all fully enclosed. This design protects all components and extends the lifespan of the lift.

    Longer approach ramps

    Low-profile, extended-length approach ramps ensure boat trailers will load onto the runways with ease.

    Automatic safety locks

    Stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button, and spring-loaded safety locks engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device for emergency protection.

    Remember, dry docking is the only way to ensure that boats are safe from water-related damage. With an in-water lift, choppy waters, floods and tides can make an unexpected mess of your beautiful boat. Don't take chances! Make sure your boat is high and dry on the BendPak HD-7500BLX boat lift.

    Features

    • 7,500-pound lifting capacity
    • Two different lifting heights to choose from
    • Electric / hydraulic power system
    • Internal anti-sway slider blocks in each column
    • Both models feature heavy-duty 3/8" aircraft cable
    • Multi-position safety locks in each column
    • Ramps feature non-skid surface
    • Runways include rail-kit for optional accessories
    • Single hydraulic cylinder underneath runway
    • Over-sized self-lubricating cable rollers
    • Rugged 1-1/4" roller axles
    • Adjustable lock ladders
    • Push-button pneumatic safety release
    • Durable powder coat finish

    Capacity

    Lifting Capacity: 7,500 lbs. (3,402 kg)
    Max Capacity / Front Axle: 3,750 lbs. (1,701 kg)
    Max Capacity / Rear Axle: 3,750 lbs. (1,701 kg)

    Rise

    A - Min. Runway Height: 5" (127 mm)
    B - Max. Rise: 82" (2,083 mm)
    C - Max. Lifting Height: 87" (2,210 mm)
    Time to Full Rise: 55 seconds

    Outside Dimensions

    D - Overall Width: 132" (3,353 mm)
    E - Outside Length: 198" (5,029 mm)
    F - Overall Length: 224" (5,690 mm)
    G - Height of Columns: 100" (2,540 mm)

    Inside Dimensions

    H - Width Between Columns: 122" (3,099 mm)
    I - Drive-Thru Clearance: 108.5" (2,756 mm)

    Runways

    J - Runway Width: 19" (483 mm)
    K - Length of Runways: 188.5" (4,788 mm)
    L - Width Between Runways: 49.5" (1,257 mm) or 69.5" (1,765 mm)
    M - Runway Centerline: 68.5" (1,740 mm) or 88.5" (2,248 mm)
    N - Outside Edge of Runways: 87.5" (2,223 mm) or 107.5" (2,731 mm)

    Minimum Wheelbase

    Rated Capacity: 135" (3,429 mm)
    75% Capacity: 115" (2,921 mm)
    50% Capacity: 95" (2,413 mm)
    25% Capacity: 80" (2,032 mm)

    Locking

    Locking Positions: 15
    Lock Spacing: Every 4" (102 mm)

    Power Unit

    Motor: 220 VAC / 60 Hz / 1 Ph
    Noise: 45 dB

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

      Warranty

      BendPak lifts are warranted for 5 years on equipment structure, to be free of defects in material and workmanship. 2 year warranty on power units, hydraulic cylinders, and 1 year on all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc.

      • Five Years (60‐Months) Warranty on the lift structure
      • Two Years (24‐Months) Warranty on the hydraulic cylinder(s) and power unit
      • One Year (12‐Months) Warranty on operating components
      • One Year (12‐Months) Warranty on electrical components (excluding power unit)
      • One Year (12‐Months) Labor Warranty on site or at factory*
      • One Year (12‐Months) Free‐Shipping** on ground‐freight charges related to warranty performance

      Shipping & Returns

      LTL Service

      LTL (less than truckload) service is the most common method of shipping for all BendPak and Ranger heavy items that are over typical parcel size. Our LTL contract carriers are YRC, Con-way and Estes. These leading freight providers handle and track hundreds of BendPak shipping transactions daily. They generally utilize enclosed vans or trailers with rear roll-up doors that provide access to the inside of the trailer. These carriers have strategically placed terminals located across the United States where they are able to consolidate all of their freight to be picked up and delivered. As a shipment moves from pick up point to destination it will be placed with other freight that is bound for the same area to be delivered. It is important to realize that LTL shipping involves additional handling as other shippers’ freight is often loaded on and off the truck en route to a destination.

      Flatbed Service

      Flatbed service is commonly the only chosen method when shipping heavy items that are oversize and not conducive to standard LTL handling (freight cannot easily be transferred in and out of cargo vans or trailers). A list of products that must be shipped via flatbed service only can be found here. For the handling and transportation of oversize or delicate cargo, flatbed service is usually a more reliable means. Freight is loaded onto owner-operator flatbed trucks at our facility in Santa Paula, California and most likely never handled until delivery. Using flatbed service involves the least handling, which translates to minimal risk of loss or damage while in transit. Transporting equipment via flatbed may increase the delivery time, but many of our customers feel the added assurance of minimized damage is worth the wait.

      For additional information: https://www.bendpak.com/support/orders/shipping-methods/

      You can always contact us at Support@TailoredGarages.com if you have any questions!

      Returns

      BendPak / Ranger prides itself on a tradition of outstanding customer care and support. Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships.

      Our limited return and exchange policy allows you to return defective or incorrect merchandise for a full or partial credit of your order. All returned merchandise requires authorization. Contact our service representatives first for shipping instructions and to obtain a return authorization number. Credit will not be issued unless authorization to return merchandise has been received.

      For all merchandise returned to BendPak / Ranger for reasons other than warranty, a 20% restocking fee and round-trip shipping costs will be deducted front he credit refund. All returned items must be in their original box or crating and must include all packing material, manuals and all accessories. At our discretion, a restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories.

      To initiate a return please contact Support@TailoredGarages.com


          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)